Tripp Lite Metered PDU with ATS, 15A, 8 Outlets (5-15R), 120V, 2 5-15P, 100-127V Input, 2 12 ft. Cords, 1U Rack-Mount Power, TAA, 2 Year Limited Warranty (PDUMH15AT)

Product Description Tripp Lite Metered ATS/ auto transfer switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to primary and secondary power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, The ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within milliseconds. Ats functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-up environment, The primary input cable must be supported by a full time sine WAVE ups with zero transfer time. Tripp Lite smart online Series is highly recommended for use as the primary UPS in a two-up application. Ats configurations utilizing separate mains circuits, backup Generators and even separate utility power Grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input Lad's display primary or secondary power availability. From the Manufacturer Do you need an efficient, cost-effective way to distribute, monitor and manage power in an IT or industrial environment? Tripp Lite's PDUMH15AT Metered Power Distribution Unit with ATS is the solution you seek! It provides eight outlets plus a digital meter that displays continuous power consumption, enabling IT personnel to monitor the PDU's load on site. Optional integrated automatic transfer switching capability enables dual AC input redundancy for critical network hardware, hot-swappable UPS maintenance bypass or dual UPS protection. The PDUMH15AT is also equipped with a built-in SNMPWEBCARD slot, enabling it to be permanently upgraded to a switched PDU. The PDUMH15AT features an all-metal housing and a switchless design to prevent accidental shutoff. It is suitable for 1U or 0U (vertical) rackmount installation as well as wall-mount, workbench, under-counter and similar installations.Key Features Reliable IT Power DistributionClick here for a larger image Digital Current MeterClick here for a larger image Reliable IT Power DistributionThe PDUMH15AT is optimized for reliable distribution of alternate waveform AC power from a UPS system, generator or utility wall outlet to supported equipment in IT environments. It provides eight 5-15R outlets and dual 12-ft. cords (one attached, one detachable) with standard 5-15P plugs. The PDUMH15AT features a rugged all-metal case, high-quality outlets and plugs and a switchless design to prevent accidental shutoff. Unfiltered electrical pass-through makes the PDUMH15AT ideal for distributing alternate waveform UPS or generator power in rack enclosures, network closets, and more.Integrated Auto-Transfer SwitchingThe PDUMH15AT features optional integrated automatic transfer switching (ATS) capability to provide a redundant power option for networking and server applications with non-redundant internal power supplies. In ATS mode, the attached power cord delivers primary input power and the included detachable power cord provides secondary input power. If primary power becomes unstable or fails, the PDU automatically performs a super-fast (2-7 milliseconds) switchover to the secondary power source. Front-panel input LEDs indicate primary or secondary power availability.Hot-Swap CapabilityATS functionality makes the PDUMH15AT ideal for adding redundancy to single-corded devices. When used with a single UPS system, it provides fault-tolerant hot-swappable UPS protection for applications requiring zero downtime. When each of its power cords is connected to a separate UPS system, the PDUMH15AT provides fully redundant, zero-downtime UPS protection. Digital Current MeterThe PDUMH15AT is equipped with a digital LED meter that displays the total connected equipment load. This meter enables IT personnel to monitor the total load on the PDU in real time, allowing more equipment to be safely connected with no danger of overloading the PDU or power supply circuits. This helps to assure proper load balance in complex redundant power applications.Optional Advanced Power Management A built-in SNMPWEBCARD slot enables the PDUMH15AT to be permanently upgraded to a switched PDU with full network power monitoring and individual outlet control capability. With an SNMPWEBCARD installed, the PDUMH15AT can also be custom programmed for power-on and power-off sequences with user-specified time delays in response to loss and restoration of primary input power.Optimized for Demanding ApplicationsThe PDUMH15AT is designed for reliable distribution of AC power to supported equipment in IT, industrial and similar applications. It features a rugged all-metal case, high-quality outlets, a 15A circuit breaker and a switchless design to prevent accidental shutoff.Versatile Installation OptionsThe PDUMH15AT is easy to integrate with a wide range of data center and network applications. It is suitable for 1U installation in standard 19-inch rack enclosures as well as wall-mount, workbench, under-counter and similar installations. Technical SpecificationsTripp Lite PDUMH15AT Metered Power Distribution Unit with ATS Click here for a larger image What's in the Box PDUMH15AT Metered PDU with ATSMounting HardwareDetachable C13 to 5-15P Power Cord Protect, Power, Organize and Control with Tripp LiteTripp Lite UPS Systems and accessories are available with a wide range of features to provide reliable, cost-effective power protection and connectivity solutions for all electronics.PDUMH15ATNET Switched/Metered Power Distribution Unit with ATSSwitched/metered 1U rackmount PDU with 16 x 5-15/20R outlets, dual 12-ft. power cords with L5-20P plugs (5-20P plug adapters included) and integrated automatic transfer switching (ATS) to support connected equipment from a secondary power source if primary input fails. The PDUMH15ATNET provides 20A 120V capacity, remote power management and individual outlet control via a secure web/network interface, a digital amp meter for on-site monitoring of total PDU load, and sequential outlet power-on capability to prevent inrush-related equipment interaction on startup. Switchless, circuit breaker-free design prevents accidental shut-off. 2-year warranty.PDUMH20AT Metered Power Distribution Unit with ATSMetered 1U rackmount PDU with 16 x 5-15/20R outlets, dual 12-ft. power cords with L5-20P plugs (5-20P plug adapters included) and integrated automatic transfer switching (ATS) to support connected equipment from a secondary power source if primary input fails. The PDUMH20AT provides 20A 120V capacity and a digital amp meter for on-site monitoring of total PDU load. Built-in card slot accepts an optional SNMPWEBCARD for permanent upgrade to a switched PDU. Switchless, circuit breaker-free design prevents accidental shut-off. 2-year warranty.SU1500RTXL2Ua SmartOnline™ UPS SystemTrue on-line operation with pure sine wave output and zero transfer time provides the highest level of protection for mission-critical equipment. The SU1500RTXL2Ua features 1500VA/1200W power capacity with 6 outlets (2 individually controllable). One USB port and one DB9 port with included cables and PowerAlert power management software provide complete power network monitoring and control. The SU1500RTXL2Ua supports connected equipment for 14 minutes during power failures at a half load of 600 watts and runtime is expandable with optional external battery packs. $250,000 Ultimate Lifetime Insurance; 2-year warranty.B020-U08-19-K NetDirector™ Console KVM SwitchControls an entire network in just 1U of rack space. The B020-U08-19-K combines a keyboard, 19-in. LCD screen, touch pad, numeric keypad, and 8-port KVM switch in a 1U slide-out unit. It is USB or PS/2 compatible with 8 included PS2/USB Combo Cable Kits for connection to servers. Controls up to 504 servers by daisy-chaining additional KVMs. Includes two front-mounted USB ports: one for attachment of a separate USB mouse and one to connect USB peripherals (flash drive, external hard drive, etc.) that can be shared between connected servers.SRCOOL12K Self-Contained Portable Air Conditioning UnitCompact, portable air conditioning unit is ideal for wiring closets and other space-critical locations where facility air conditioning can't reach. 12,000 BTU of cooling power. Connects to a standard 5-15R receptacle; no adapter required. Uses EPA-compliant R410a refrigerant. Standard louvered vent for general room cooling; ducted vent to direct cold air where needed. Requires no floor drain or water collection tank. 1-year warranty.SR42UB SmartRack™ EnclosurePremium 42U rack enclosure organizes and secures all standard rackmount equipment. The SR42UB features locking, removable, reversible front and rear doors; locking, removable side panels keyed alike with doors; 4 interior vertical posts with unthreaded square-hole openings; preinstalled casters and leveling feet; and 3000-lb. stationary/2250-lb. rolling load capacity. The SR42UB ships fully assembled and comes with a 5-year repair/replacement warranty. A full range of rackmount accessories is also available.

• 1U rackmount PDU with display to indicate total PDU power consumption in Amps
• Optional ATS (auto transfer switch) function enables setup for hot-swappable ups maintenance bypass, dual ups protection or dual AC input redundancy for critical single-corded network hardware
• 15a 120V capacity with 8 NEMA 5-15R outlets and 2 NEMA 5-15P input connections
• Switchover between primary and secondary power sources occurs in 2-7 milliseconds
• Optional snap network interface supports individual outlet control and remote monitoring of PDU loading and site electrical conditions
• 2-Year limited warranty